Energy input for explosive events in the transition zone

It is suggested that the energy input for explosive events in the transition zone comes from precipitating ions, typically of energies of a few×10² keV/nucleon, accelerated in the high corona. The energetics of the process are discussed, together with implications for coronal heating.     

Influence of deformation zone length on bending radius of SS304 tubes with small diameters manufactured via free bending-based active motion

In three and six-axis free-bending equipment, the deformation zone length(A) is a fixed mechanical structure parameter modified when the relevant structure is redesigned and manufactured. In this study, a six degree of freedom(6-DOF) parallel mechanism was used as the control mechanism of the bending die, and a new method of changing the deformation zone length(A)was proposed. Firstly, an idealized geometric model of free bending-based active motion was established. Then, the influence of the de...     

航空复合材料纸蜂窝夹芯结构热成型开裂研究

飞机复合材料芳纶纸蜂窝夹芯部件在热压罐成型时处于热-力耦合工况。本文关注热成型过程中可能出现的蜂窝开裂现象,通过试验获得了蜂窝芯的拉、压、剪性能参数和芳纶纸的热性能参数,同时结合有限元分析手段和反演方法,对整体蜂窝夹芯部件的热-力顺序耦合和局部芯子抽真空导致的蜂窝胞元间压强差进行数值模拟。结果表明：成型过程中的热应力不会导致蜂窝胞元间胶层开裂,局部憋气的压差可能导致蜂窝开裂;胶层部分破坏与胶层完全破坏所需的胞元间压强差的差值与胶层初始法向断裂应力正相关;胶层完全破坏所需的胞元间压强差随着受载胞元数量的增多而减小。     

应用遗传算法优化低/零相关区序列偶

介绍遗传算法的特点和低/零相关区序列偶的概念。讨论用遗传算法优化两个字节长度内(63长以内)的低/零相关区序列偶。通过实验发现,所搜到的序列偶具有比较理想的低/零相关区和很高的主峰值。     

CBERS-1卫星IRMSS数据在中国北方汝箕沟煤田煤层自燃区遥感分析中的试应用研究

根据热红外波段对地物热信息反映灵敏的特征 ,基于CBERS-1卫星红外多光谱扫描仪(IRMSS)所获得的2000年7月1日宁夏汝箕沟地区的图像数据 ,首先进行错位纠正、去条带、消除随机噪声等处理。通过对IRMSSB6、B7、B8、B9单波段的线性拉伸、指数变换、主成份分析 ,以及IRMSSB6、B7和B8、IRMSSB6、B7和B9的假彩色合成处理、波段运算等增强处理 ,有效地提取了由煤层自燃引起的地表热异常 ,以及煤堆、裸岩、居民区的热异常信息。通过分析对比 ,对IRMSS图像数据进行煤火信息提取进行了评价     

Comparison of model and experimental ionospheric parameters at high latitudes

Modern use and study of the auroral region needs to attract a wider class of models for describing conditions of radio wave propagation in the ionosphere. In this paper the possibilities of the International Reference Ionosphere model, well-proven and widespread in the mid-latitudes, are investigated in the high latitude zone. Model and measured values of the critical frequency foF2 for two mid-latitude stations (Juliusruh and Goosebay) and four high-latitude ones (Loparskaya, Sodankyla, Sondrestrom, Thule) are compared. Deviations of medians, variations from day to day and solar activity trends seemed to be similar for both areas. This similarity is irrespective of the RZ12 index. Special attention is paid to the TEC parameter and its determination using 6 versions of models, a new version of the model IRI2010 (IRI-Plas) among them. It is shown that the IRI-Plas model significantly improves the definition of TEC in contrast to the versions of IRI2007 and the new model NeQuick. The use of the median of the experimental equivalent slab thickness, together with the current values of the TEC, increases by a factor of two the agreement between calculated and measured foF2 values as compared with the variations from day to day. This allows foF2 to be defined in near-real time.     

新乡市工业化与城镇化互动关系研究

采用定量指标IU比和NU比分析了新乡市1978-2010年的城镇化与工业化对比关系，总体而言新乡市城镇化水平低于工业化水平。对新乡而言，应该借助中原经济区建设的契机，依托现有的城镇和工业基础，推进产业结构的优化，大力发展第三产业和服务业，加快体制创新，促进农村劳动力向城镇转移，增加就业。     

变循环压缩系统涵道流动计算模型及模式转换倒流判据研究

为了研究双外涵变循环压缩系统的涵道流动匹配规律，发展了涵道流动的计算模型，对压缩系统模式转换过程中外涵道倒流问题的发生机理和影响因素进行了深入分析，总结了压缩系统的倒流判断准则，并基于简化计算模型和全三维计算结果对倒流判据进行了验证。研究结果表明，对于一定的压缩系统匹配状态，存在一个决定涵道匹配状态的临界核心机驱动风扇级(Core Driven Fan Stage, CDFS)总压比，当CDFS的实际工作压比高于临界压比时，压缩系统第二外涵道将发生倒流，反之则系统不倒流。复杂涵道系统内的流动损失和堵塞等特性对临界CDFS总压比有显著影响，为了准确判断压缩系统的匹配状态，需要对其进行精确模化。基于简化模型得到的压缩系统倒流临界线可以推广至全三维状态，本文提出的倒流判别准则具有较高的可靠性和可行性。     

纤维增强韧性基体复合材料界面损伤分析

用基于内聚力的界面模型分析了纤维增强韧性基体复合材料的界面损伤,研究了连续纤维增强复合材料受横向荷载时,诸如纤维排布方式、纤维体积占有率以及纤维和机体模量比等细观参数对界面损伤和材料拉伸强度的影响.研究发现,当纤维体积占有率和纤维模量提高,以及纤维按四方排布时,虽然能增加复合材料刚度,但纤维与基体的界面更容易损伤.当界面脱粘现象存在时,复合材料的拉伸强度主要由界面强度决定.     

对我国企业广告误区的分析

随着我国社会主义商品经济发展到以销定产的买方市场阶段，企业广告活动的数量、范围都在大幅度地增长。但在快速增长的同时，也存在着一系列的问题，作者对这些问题加以分析。